A Signature Bridge for Boston (Available only in Structural Engineering Special Issue)
The first hybrid steel and concrete span in America will debut over the Charles River in Boston, carrying ten lanes of interstate traffic and serving as an elegant capstone to the largest...
Design of Blast Resistant Buildings in Petrochemical Facilities
This report provides general guidelines in the structural design of blast resistant petrochemical facilities. Informational coverage is provided for OSHA requirements, design objectives,...
Guidelines for Retirement of Dams and Hydroelectric Facilities
Prepared by the Task Committee on Guidelines for Retirement of Dams and Hydroelectric Facilities of the Hydropower Committee of the Energy Division of ASCE. ...
Stabilizing the Stacks
Spenser White and Prentis designed a hybrid soil nailing system to ensure that a historic library on the Bryn Mawr, Pennsylvania, campus would not be damaged during adjacent construction...
Chemical Grouting
Technical Engineering and Design Guide, as adapted from U.S. Army Corps of Engineers, No. 24. This manual provides information and guidance for the...
Turnback Project Moves Ahead
The $202 million Muni Metro Turnback (MMT) Project, scheduled for completion in September 1996, includes an 840 ft section consisting of twin steel-lined tunnels that connects to the Embarcadero...
Worth the Risk?
The construction process is fraught with uncertainties, but integrated, proactive risk assessment and risk management methods can help owners, engineers and contractors make better, informed...
Cable Corrosion in Bridges and Other Structures:
Causes and Solutions
This book provides the reader with basic facts concerning cable corrosion and means to avoid or rehabilitate corrosion damage. Corrosion problems associated with cable-supported structures...
A Simplified Process Audit to Design an Affordable Pollution Prevention and Waste Management Plan -
This paper presents a simplified approach to the general audit procedure that is applicable to the Small and Medium Enterprise (SME). The process leads to the identification of major sources...
A Multiperiod Approach for the Solution of Groundwater Management Problems using the Outer Approximation Method
In a previous work the Outer Approximation method was presented (Karatzas and Pinder, 1993 and 1996) for the solution of groundwater management problems where the selected pumping rates...
Use of SALQR Optimization in Large Aquifer Cleanup
A modified form of Differential Dynamic Programming (DDP), called Suc cessive Approximation to a Linear Quadratic Regulator (SALQR), is used to compute optimal policies for remediation...
A Graphical Environment for Multi-Dimensional Surface Water Modeling
Recently the Engineering Computer Graphics Laboratory of Brigham Young University in conjunction with the U.S. Army Engineer Waterways Experiment Station and the Federal Highway Administration...
An LPI Numerical Implicit Solution for Unsteady Mixed-Flow Simulation
A Local Partial Inertia (LPI) technique is developed as an option within the National Weather Service (NWS) FLDWAV dynamic flood routing model to enhance its capability to model unsteady...
SpatioTemporal Stochastic Open-Dhannel Flow
The de Saint Venant equations are solved as stochastic partial differential equations whose parameters (hydraulic resistance, bed slope, cross-section geometiy, inflow hydrograph, seepage,...
Analysis of Bank Stabilization in Steep Complex Streams Using A Two-Dimensional Model
In cases where the channel is fairly uniform, and not divided, one-dimensional hydraulic models, such as HEC-2, generally give adequate results for scour evaluations and bank protection...
Efficient Pump Representation for Fixed-Grid MOC in Pipeline Systems
An explicit solution of the pump power failure boundary condition is shown to have many computational advantages over the conventional implicit pump boundary condition solution (i.e.,...
The Impact of Numerical Precision on Optimal Groundwater Hydraulic Control
The numerical precision retained in the formulation of groundwater hydraulic control optimization problems can have significant impacts on the accuracy of the solution. Sources of imprecision...
Impact of Sedimentation Caused by Runoff
As water is pumped into a reservoir, sedimentation caused by runoff can be an important factor in the reservoir's storage capacity. This report discusses various studies conducted...
Application of the Newton Method in Valve Discharge Coefficient Relationships
This paper presents a methodology that utilizes the Newton Method to compute the dimensionless valve discharge coefficient Cd from a manufacturers valve discharge coefficient Cv. The implicit...
Game Model Approach to Multi-Purpose/Multi-Objective Water Resources Related Environmental Protection Project Planning and Management in Developing Nations: A Nigerian Example
The best has not been realised from water resources related environmental protection projects in Nigeria due to problems militating against such projects at the planning, management and...
Return to search